Brand Name : NETGEAR
Series : Single Band N v2
Item model number : WNAP210-200NAS
Hardware Platform : PC;Mac;Unix
Item Weight : 1.9 pounds
Product Dimensions : 11.7 x 10 x 2.9 inches
Item Dimensions L x W x H : 11.73 x 9.96 x 2.87 inches
Voltage : 12 volts
Brand : Netgear
Model : WAC505-10000S
Model Year : 2017
Item Weight : 254 g
Product Dimensions : 16.5 x 17.5 x 3.5 cm
Item model number : WAC505 10000S
Number Of Items : 1
Colour Screen : No
Voltage : 12 Volts
Batteries Included : No
Batteries Required : No
Data Transfer Rate : 1200 megabits per second
Number of Ports : 2
Includes Rechargable Battery : No
Includes AC Adapter : Yes
Supports Bluetooth Technology : No
Programmable Buttons : No
Cisco Catalyst IW6300 Heavy Duty Series Access Points
Designed for Class I Division 2 hazardous locations
Intelligence with intent-based networking to the IoT Edge and IOx support
Partner IoT modules for WirelessHART ISA100
Cisco DNA Assurance for network management
802.11ac Wave 1 and 2 capabilities
2x2 MIMO with two spatial streams
Multi- and single-user MIMO
Maximal-Ratio Combining (MRC)
802.11ac beamforming (transmit beamforming)
20- 40- and 80-MHz channels
PHY data rates up to 867 Mbps (80-MHz bandwidth in 5 GHz)
Packet aggregation: A-MPDU (Tx/Rx) and A-MSDU (Tx/Rx)
802.11 Dynamic Frequency Selection (DFS)
Cyclic Shift Diversity (CSD) support
802.11n Version 2.0 (and related) capabilities
2x2 MIMO with two spatial streams
Maximal-Ratio Combining (MRC)
20- and 40-MHz channels
PHY data rates up to 300 Mbps (40-MHz bandwidth in 5 GHz)
Packet aggregation: A-MPDU (Tx/Rx) and A-MSDU (Tx/Rx)
802.11 Dynamic Frequency Selection (DFS)
Cyclic Shift Diversity (CSD) support
Data rates supported
2.4-GHz radio:
802.11b: 1 2 5.5 11 Mbps
802.11g: 6 9 12 18 24 36 48 54 Mbps
802.11n data rates:
Interfaces
x1 10/100/1000BASE-T autosensing PoE+ In (802.3at)UPOE in
x2 10/100/1000BASE-T autosensing PoE Out (802.3af) PoE+ out (802.3at)
x1 fiber SFP (fiber or electrical)
Management console port (RJ-45)
USB3.0 port
Multicolor system LED port LED
DC power input (IW-6300H-DC-X-K9 IW-6300H-DCW-X-K9)
AC power input (IW-6300H-AC-X-K9)
Reset button
Uplink options
Ethernet SFP and wireless mesh
Dimensions (W x L x H)
IW-6300H-DC-X-K9: 9.7" x 11" x 3.8"
IW-6300H-DCW-X-K9: 9.7" x 11" x 5.6"
IW-6300H-AC-X-K9: 9.7" x 11" x 5.6"
Weight
13.3 lbs (IW-6300H-AC-X-K9), 9.8 lbs (IW-6300H-DC-X-K9),
12.7 lbs (IW-6300H-DCW-X-K9)
Warranty
1 year
IW 6300 Series
IW-6300H-DC-X-K9: Dual-band 802.11a/g/n/ac Wave 2 external antennas 44-57VDC/POE+/UPOE power input
IW-6300H-DCW-X-K9: Dual-band 802.11a/g/n/ac Wave 2 external antennas 10.8-36VDC/POE+/UPOE power input
IW-6300H-AC-X-K9: Dual-band 802.11a/g/n/ac Wave 2 external antennas 110-220VAC/POE+/UPOE power input
Cisco Embedded Wireless Controller on Catalyst Aaccess Point
Catalyst 9800 embedded on a Catalyst 9100 access point
Ideal for distributed branches and small campuses
Up to 100 APs and 2 000 clients
Hot patching time saving and hitless upgrades
The Cisco Embedded Wireless Controller on Catalyst® Access Points (EWC-AP) is the next-generation Wi-Fi solution combining the most advanced controller – the Cisco Catalyst 9800 Series Wireless Controllers – with the latest Wi-Fi 6 access points – the Cisco Catalyst 9100 Access Points – creating a best-in-class wireless experience for your evolving and growing organization.
With the 9800 Series wireless controller embedded on the Cisco Catalyst 9100 Access Points organizations can now benefit from enterprise-class resiliency security and IT simplicity for single or multisite enterprise deployments.
Built for intent-based networking and Cisco DNA the EWC-AP helps you simplify complexity optimize IT and reduce operational costs by leveraging intelligence automation and human expertise that no other vendor can deliver regardless of where you are in the intent-based networking journey.
Maximum number of access points : Up to 100
Maximum number of clients : Up to 2000
Maximum number of WLANs :16
Deployment modes:Cisco FlexConnect®
Maximum FlexConnect APs per site :100
License :Smart License enabled
Operating system : Cisco IOS® XE Software
Management : Cisco DNA Center 1.3.2 integrated WebUI mobile app and third party (open standards APIs)
Policy engine : Cisco Identity Services Engine (ISE) 2.2 2.3 and 2.4
Access points : Cisco Catalyst 9100 Access Points and Aironet® 802.11ac Wave 2 access points (operating in client serving mode only)
Warranty information :
The Cisco Embedded Wireless Controller on Catalyst Access Points comes with a limited lifetime warranty that provides full warranty coverage of the hardware for as long as the original end user continues to own or use the product.
The warranty includes 10-day advance hardware replacement and ensures that software media are defect-free for 90 days.
For more details
Your embedded software is subject to the Cisco End User License Agreement (EULA) (link available below)
and/or any Supplemental EULA (SEULA) or specific software warranty terms for additional software products loaded on the device.
Security
Rogue detection classification and containment
802.1X supplicant support on EWC-AP
Walled garden and DNS ACLs
Management
Cisco DNA Center for Automation and Assurance
Dashboard (web browser) and easy-to-use mobile app for deploying provisioning and monitoring
Standards-based interoperability tools using programmable interfaces
Open standards-based programmability with NETCONF and YANG
Guest
Central web authentication local web authentication and BYOD
Cisco DNA Spaces integration for personalized and relevant guest experience