Cisco Access Point

Four radios: 2.4 GHz (4x4), 5 GHz (8x8 and 4x4), Cisco RF ASIC, and BLE/IoT Cisco Flexible Radio Assignment and Cisco CleanAir Technology Internal and external antenna WiFi 6 certified Software: Catalyst 9130 AXI: Cisco Unified Wireless Network Software Release 8.10.x or later Cisco IOS XE Software Release 16.12.1 with AP Device Pack, or later Catalyst 9130AXE: Cisco Unified Wireless Network Software Release 8.10MR1 or later Cisco IOS XE Software Release 17.1.1 s or later Supported wireless LAN controllers: Cisco Catalyst 9800 Series Wireless Controllers Cisco 3504, 5520, and 8540 Wireless Controllers and Cisco Virtual Wireless Controller 802.11n version 2.0 (and related) capabilities 4x4 MIMO with four spatial streams Maximal Ratio Combining (MRC) 802.11n and 802.11a/g 20- and 40 MHz channels PHY data rates up to 1.5 Gbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz) Packet aggregation: Aggregate MAC Protocol Data Unit (A-MPDU) (transmit and receive), Aggregate MAC Service Data Unit (A-MSDU) (transmit and receive) 802.11 Dynamic Frequency Selection (DFS) Cyclic Shift Diversity (CSD) support 802.11ac 8x8 downlink MU-MIMO with eight spatial streams MRC 802.11ac beamforming 20-, 40-, 80-, and 160-MHz channels PHY data rates up to 6.9 Gbps (160 MHz with 5 GHz) Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) 802.11 DFS CSD support WPA3 support 802.11ax 8x8 uplink/downlink MU-MIMO with eight spatial streams Uplink/downlink OFDMA TWT BSS coloring MRC 802.11ax beamforming 20-, 40-, 80-, and 160-MHz channels PHY data rates up to 10 Gbps (160 MHz with 5 GHz and 20 MHz with 2.4 GHz) Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) 802.11 DFS CSD support WPA3 support System memory: 2048 MB DRAM, 1024 MB flash Interfaces 1x 100, 1000, 2500, 5000 Multigigabit Ethernet (RJ-45) – IEEE 802.3az Management console port (RJ-45) USB 2.0 at 4.5W (enabled via future software) Dimensions (W x L x H) Access point (without mounting brackets): C9130AXI: 8.9 x 8.9 x 1.88 in. (22.6 x 22.6 x 4.8 cm) C9130AXE: 9.17 x 9.17 x 1.58 in. (23.3 x 23.3 x 4.0 cm) Weight: Cisco Catalyst 9130AXI, 3.2 lb. (1.45 kg) Cisco Catalyst 9130AXE, 3.78 lb. (1.71 kg) Warranty: Limited lifetime hardware warranty

Four radios: 2.4 GHz (4x4), 5 GHz (4x4), Cisco RF ASIC and BLE/IoT Cisco Flexible Radio Assignment and Cisco CleanAir Technology Internal and external antenna Software Cisco Unified Wireless Network Software Release 8.9.x or later Cisco IOS XE Software Release 16.11 with AP Device Pack, or later Supported wireless LAN controllers Cisco Catalyst 9800 Series Wireless Controllers Cisco 3500, 5520, and 8540 Series Wireless Controllers and Cisco Virtual Wireless Controller 802.11n version 2.0 (and related) capabilities 4x4 MIMO with four spatial streams Maximal Ratio Combining (MRC) 802.11n and 802.11a/g beamforming 20- and 40-MHz channels PHY data rates up to 890 Mbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz) Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) 802.11 Dynamic Frequency Selection (DFS) Cyclic Shift Diversity (CSD) support 802.11ac 4x4 downlink MU-MIMO with four spatial streams MRC 802.11ac beamforming 20-, 40-, 80-, and 160-MHz channels PHY data rates up to 3.47 Gbps (160 MHz with 5 GHz) Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) 802.11 DFS CSD support 802.11ax 4x4 downlink MU-MIMO with four spatial streams Uplink/downlink OFDMA TWT BSS coloring MRC 802.11ax beamforming 20-, 40-, 80-, and 160-MHz channels PHY data rates up to 5.38 Gbps (160 MHz with 5 GHz and 20 MHz with 2.4 GHz) Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) 802.11 DFS CSD support Interfaces: 1x 100, 1000, 2500 Multigigabit Ethernet (RJ-45)IEEE 802.3bz Management console port (RJ-45), USB 2.0 3.75W (enabled via future software) Indicators: Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors Dimensions (W x L x H) Access point (without mounting brackets): C9120I: 8.5 x 8.5 x 1.7 (21.6 x 21.6 x 4.3 cm), C9120E and C9120P: 8.5 x 8.05x 2.0 (21.6 x 21.6 x 5.1 cm) Weight: Cisco Catalyst 9120I, 2.87 lbs (1.3 kg) Cisco Catalyst 9120E/P, 3 lbs (1.36 kg) System memory: 2048 MB DRAM, 1024 MB flash Warranty: Limited lifetime hardware warranty

Four radios: 2.4 GHz (4x4), 5 GHz (4x4), Cisco RF ASIC and BLE/IoT Cisco Flexible Radio Assignment and Cisco CleanAir Technology Internal and external antenna Software Cisco Unified Wireless Network Software Release 8.9.x or later Cisco IOS XE Software Release 16.11 with AP Device Pack, or later Supported wireless LAN controllers Cisco Catalyst 9800 Series Wireless Controllers Cisco 3500, 5520, and 8540 Series Wireless Controllers and Cisco Virtual Wireless Controller 802.11n version 2.0 (and related) capabilities 4x4 MIMO with four spatial streams Maximal Ratio Combining (MRC) 802.11n and 802.11a/g beamforming 20- and 40-MHz channels PHY data rates up to 890 Mbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz) Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) 802.11 Dynamic Frequency Selection (DFS) Cyclic Shift Diversity (CSD) support 802.11ac 4x4 downlink MU-MIMO with four spatial streams MRC 802.11ac beamforming 20-, 40-, 80-, and 160-MHz channels PHY data rates up to 3.47 Gbps (160 MHz with 5 GHz) Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) 802.11 DFS CSD support 802.11ax 4x4 downlink MU-MIMO with four spatial streams Uplink/downlink OFDMA TWT BSS coloring MRC 802.11ax beamforming 20-, 40-, 80-, and 160-MHz channels PHY data rates up to 5.38 Gbps (160 MHz with 5 GHz and 20 MHz with 2.4 GHz) Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) 802.11 DFS CSD support Interfaces: 1x 100, 1000, 2500 Multigigabit Ethernet (RJ-45)IEEE 802.3bz Management console port (RJ-45), USB 2.0 3.75W (enabled via future software) Indicators: Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors Dimensions (W x L x H) Access point (without mounting brackets): C9120I: 8.5 x 8.5 x 1.7 (21.6 x 21.6 x 4.3 cm), C9120E and C9120P: 8.5 x 8.05x 2.0 (21.6 x 21.6 x 5.1 cm) Weight: Cisco Catalyst 9120I, 2.87 lbs (1.3 kg) Cisco Catalyst 9120E/P, 3 lbs (1.36 kg) System memory: 2048 MB DRAM, 1024 MB flash Warranty: Limited lifetime hardware warranty

Four radios: 2.4 GHz (4x4), 5 GHz (8x8 and 4x4), Cisco RF ASIC, and BLE/IoT Cisco Flexible Radio Assignment and Cisco CleanAir Technology Internal and external antenna WiFi 6 certified Software: Catalyst 9130 AXI: Cisco Unified Wireless Network Software Release 8.10.x or later Cisco IOS XE Software Release 16.12.1 with AP Device Pack, or later Catalyst 9130AXE: Cisco Unified Wireless Network Software Release 8.10MR1 or later Cisco IOS XE Software Release 17.1.1 s or later Supported wireless LAN controllers: Cisco Catalyst 9800 Series Wireless Controllers Cisco 3504, 5520, and 8540 Wireless Controllers and Cisco Virtual Wireless Controller 802.11n version 2.0 (and related) capabilities 4x4 MIMO with four spatial streams Maximal Ratio Combining (MRC) 802.11n and 802.11a/g 20- and 40 MHz channels PHY data rates up to 1.5 Gbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz) Packet aggregation: Aggregate MAC Protocol Data Unit (A-MPDU) (transmit and receive), Aggregate MAC Service Data Unit (A-MSDU) (transmit and receive) 802.11 Dynamic Frequency Selection (DFS) Cyclic Shift Diversity (CSD) support 802.11ac 8x8 downlink MU-MIMO with eight spatial streams MRC 802.11ac beamforming 20-, 40-, 80-, and 160-MHz channels PHY data rates up to 6.9 Gbps (160 MHz with 5 GHz) Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) 802.11 DFS CSD support WPA3 support 802.11ax 8x8 uplink/downlink MU-MIMO with eight spatial streams Uplink/downlink OFDMA TWT BSS coloring MRC 802.11ax beamforming 20-, 40-, 80-, and 160-MHz channels PHY data rates up to 10 Gbps (160 MHz with 5 GHz and 20 MHz with 2.4 GHz) Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) 802.11 DFS CSD support WPA3 support System memory: 2048 MB DRAM, 1024 MB flash Interfaces 1x 100, 1000, 2500, 5000 Multigigabit Ethernet (RJ-45) – IEEE 802.3az Management console port (RJ-45) USB 2.0 at 4.5W (enabled via future software) Dimensions (W x L x H) Access point (without mounting brackets): C9130AXI: 8.9 x 8.9 x 1.88 in. (22.6 x 22.6 x 4.8 cm) C9130AXE: 9.17 x 9.17 x 1.58 in. (23.3 x 23.3 x 4.0 cm) Weight: Cisco Catalyst 9130AXI, 3.2 lb. (1.45 kg) Cisco Catalyst 9130AXE, 3.78 lb. (1.71 kg) Warranty: Limited lifetime hardware warranty

Designed for Class I Division 2 hazardous locations Intelligence with intent-based networking to the IoT Edge and IOx support Partner IoT modules for WirelessHART  ISA100 Cisco DNA Assurance for network management 802.11ac Wave 1 and 2 capabilities    2x2 MIMO with two spatial streams  Multi- and single-user MIMO  Maximal-Ratio Combining (MRC)   802.11ac beamforming (transmit beamforming)   20- 40- and 80-MHz channels   PHY data rates up to 867 Mbps (80-MHz bandwidth in 5 GHz)   Packet aggregation: A-MPDU (Tx/Rx) and A-MSDU (Tx/Rx)   802.11 Dynamic Frequency Selection (DFS)   Cyclic Shift Diversity (CSD) support     802.11n Version 2.0 (and related) capabilities   2x2 MIMO with two spatial streams   Maximal-Ratio Combining (MRC)   20- and 40-MHz channels   PHY data rates up to 300 Mbps (40-MHz bandwidth in 5 GHz)   Packet aggregation: A-MPDU (Tx/Rx) and A-MSDU (Tx/Rx)   802.11 Dynamic Frequency Selection (DFS)   Cyclic Shift Diversity (CSD) support     Data rates supported 2.4-GHz radio: 802.11b: 1  2  5.5  11 Mbps 802.11g: 6  9  12  18  24  36  48  54 Mbps 802.11n data rates:   Interfaces  x1 10/100/1000BASE-T autosensing PoE+ In (802.3at)UPOE in   x2 10/100/1000BASE-T autosensing PoE Out (802.3af) PoE+ out (802.3at)   x1 fiber SFP (fiber or electrical)   Management console port (RJ-45)   USB3.0 port   Multicolor system LED  port LED   DC power input (IW-6300H-DC-X-K9  IW-6300H-DCW-X-K9)   AC power input (IW-6300H-AC-X-K9)   Reset button   Uplink options Ethernet  SFP  and wireless mesh   Dimensions (W x L x H) IW-6300H-DC-X-K9: 9.7" x 11" x 3.8" IW-6300H-DCW-X-K9: 9.7" x 11" x 5.6" IW-6300H-AC-X-K9: 9.7" x 11" x 5.6"   Weight 13.3 lbs (IW-6300H-AC-X-K9), 9.8 lbs (IW-6300H-DC-X-K9), 12.7 lbs (IW-6300H-DCW-X-K9)   Warranty 1 year   IW 6300 Series   IW-6300H-DC-X-K9: Dual-band 802.11a/g/n/ac  Wave 2  external antennas  44-57VDC/POE+/UPOE power input   IW-6300H-DCW-X-K9: Dual-band 802.11a/g/n/ac  Wave 2  external antennas  10.8-36VDC/POE+/UPOE power input   IW-6300H-AC-X-K9: Dual-band 802.11a/g/n/ac  Wave 2  external antennas  110-220VAC/POE+/UPOE power input

Embed resilient Cisco WiFi into your hardware. Extend intent-based networking to your solutions . IOx support for intelligence at the edge. Cisco DNA Assurance for worry-free network management.   Radio type 2.4 GHz: 802.11b/g/n  2x2 MIMO  2 spatial streams 5 GHz: 802.11a/n/ac  2x2 MIMO  2 spatial streams   802.11ac Wave 2 capabilities  2x2 MIMO with two spatial streams   Multi- and single-user MIMO   Maximal-Ratio Combining (MRC)   802.11ac beamforming (transmit beamforming)   20- 40- and 80-MHz channels   PHY data rates up to 867 Mbps (80-MHz bandwidth in 5 GHz)   Packet aggregation: A-MPDU (Tx/Rx) and A-MSDU (Tx/Rx)   802.11 Dynamic Frequency Selection (DFS)   Cyclic Shift Diversity (CSD) support   802.11n Version 2.0 (and related) capabilities   2x2 MIMO with two spatial streams   Maximal-Ratio Combining (MRC)   20- and 40-MHz channels   PHY data rates up to 300 Mbps (40-MHz bandwidth in 5 GHz)   Packet aggregation: A-MPDU (Tx/Rx) and A-MSDU (Tx/Rx)   802.11 Dynamic Frequency Selection (DFS)  Cyclic Shift Diversity (CSD) support   Data rates supported 2.4-GHz radio: 802.11b: 1  2  5.5  11 Mbps 802.11g: 6  9  12  18  24  36  48  54 Mbps 802.11n data rates:   Interfaces  x1 10/100/1000BASE-T auto-sensing PoE+ in (802.3at)Cisco Universal Power over Ethernet (UPOE) in   x2 10/100/1000BASE-T auto-sensing PoE out (802.3af) PoE+ out (802.3at)   x1 fiber SFP (fiber or electrical)   Management console port (RJ-45)   USB 3.0 port   Multicolor system LED  port LED   DC power input   Reset button   Uplink options Ethernet  SFP  and wireless mesh   Antennas :Dual band   PoE output : 35.3 W total Maximum 30W per PSE port   USB interface  USB 2.0 / USB 3.0 supported   Dimensions (H x W x L) 8.5 in. x 7.55 in. x 1.9 in.   Weight 3.1 lbs.   Warranty 1 year