Router

ISR 4221 GE/SFP integrated WAN ports 1.2 Gbps performance 75 Mbps encrypted throughput Aggregate Throughput 35 Mbps to 75 Mbps Total onboard WAN or LAN 10/100/1000 ports 2 RJ-45 based ports 2 SFP based ports 1 NIM (Network Interface Modules): slots 2 Onboard ISC slot No Default memory double data rate 3 (DDR3) error correction code (ECC) DRAM (Combined control/services/data planes): 4 GB Flash Memory: 8 GB Power supply: options External AC only Rack height: 1 RU USB console port: type B mini (up to 115.2 kbps) 0 Serial console port: RJ45 (up to 115.2 kbps) 1 (combo CON/AUX port) Serial auxiliary port: RJ45 (up to 115.2 kbps) 1 (combo CON/AUX port) Power supply options External: AC Only Redundant power supply N/A AC input voltage 100 to 240 VAC autoranging AC input frequency 47 to 63 Hz AC input current range, AC power supply (maximum) 1.5 to 0.6A AC input surge current 90 A peak and less than 3 Arms per half cycle Typical power (no modules) (watts): 24 Maximum power with AC power supply (watts): 90 Maximum power with PoE power supply (platform only) (watts) NA (no PoE support) Maximum endpoint PoE power available from PoE power supply (watts) NA (no PoE support) Dimensions (H x W x D): 1.72 x 12.7 x 10 in (43.7 x 322.6 x 254 mm) Weight with AC PS (no modules): 7.1 lb (3.22 kg) ISR 4331 GE/SFP integrated WAN ports 2 Gbps+ performance 500 Mbps encrypted throughput Aggregate Throughput 100 Mbps to 300 Mbps Total onboard WAN or LAN 10/100/1000 ports 3 RJ-45 based ports: 2 SFP based ports: 2 Enhanced service module (SM-X): slot 1 NIM (Network Interface Modules): slots 2 Onboard ISC slot 1 Memory: 4 GB (default) / 16 GB (maximum) Flash Memory: 4 GB (default) / 16 GB (maximum) Power supply options Internal: AC and PoE Rack height: 1 RU NIM slots 2 OIR (all I/O modules): Yes Onboard ISC slot 1 Default memory double data rate 3 (DDR3) error-correction-code (ECC) DRAM (Combined control/services/data planes) 4 GB Maximum memory DDR3 ECC DRAM (Combined control/services/data planes) 16 GB Default memory DDR3 ECC DRAM (data plane) NA Maximum memory DDR3 ECC DRAM (data plane) NA Default memory DDR3 ECC DRAM (control/services plane) NA Maximum memory DDR3 ECC DRAM (control/services plane) NA Default flash memory: 4 GB Maximum flash memory: 16 GB External USB 2.0 slots (type A) 1 USB console port: type B mini (up to 115.2 kbps) 1 Serial console port: RJ45 (up to 115.2 kbps) 1 Serial auxiliary port: RJ45 (up to 115.2 kbps) 1 Power-supply options Internal: AC and PoE Redundant power supply N/A AC input voltage 100 to 240 VAC autoranging AC input frequency 47 to 63 Hz AC input current range, AC power supply (maximum) 3 to 1.3A AC input surge current 60 A peak and less than 5 Arms per half cycle Typical power (no modules) (watts) 42 Maximum power with AC power supply (watts) 250 Maximum power with PoE power supply (platform only) (watts) 530 Maximum endpoint PoE power available from PoE power supply (watts) 250 Dimensions (H x W x D): 44.45 x 438.15 x 438.15 mm Package Weight: 12.96 Kg ISR 4431 PoE GE/SFP, GE/SFP integrated WAN ports 4 Gbps + performance 900 Mbps encrypted throughput Aggregate Throughput 500 Mbps to 1 Gbps Total onboard WAN or LAN 10/100/1000 ports 4 RJ-45 based ports: 4 SFP-based ports: 4 Enhanced service module (SM-X) slot 0 NIM (Network Interface Modules) slots 3 Onboard ISC slot 1 DDRM (data plane): 2 GB (default) / 2 GB (maximum) DDRM (control/services plane): 4 GB (default) / 16 GB (maximum) Flash Memory: 8 GB (default) / 32 GB (maximum) Power supply options Internal: AC, DC, and PoE Rack height: 1 RU Doublewide service module slots 0 NIM slots 3 OIR (all I/O modules): Yes Onboard ISC slot 1 Default memory double data rate 3 (DDR3) error correction code (ECC) DRAM (Combined control/services/data planes)NA Maximum memory DDR3 ECC DRAM (Combined control/services/data planes) NA Default memory DDR3 ECC DRAM (data plane) 2 GB Maximum memory DDR3 ECC DRAM (data plane) 2 GB Default memory DDR3 ECC DRAM (control/services plane) 4 GB Maximum memory DDR3 ECC DRAM (control/services plane) 16 GB Default flash memory: 8 GB Maximum flash memory: 32 GB External USB 2.0 slots (type A) 2 USB console port: type B mini (up to 115.2 kbps) 1 Serial console port: RJ45 (up to 115.2 kbps) 1 Serial auxiliary port: RJ45 (up to 115.2 kbps) 1 Power-supply options Internal: AC, DC, and PoE Redundant power supply Internal: AC, DC, and PoE AC input voltage 100 to 240 VAC autoranging AC input frequency 47 to 63 Hz AC input current range, AC power supply (maximum) 3 to 1.3A AC input surge current 60 A peak and less than 5 Arms per half cycle Typical power (no modules) (watts) 65 Maximum power with AC power supply (watts) 250 (no PoE) Maximum power with PoE power supply (platform only) (watts) 500 with PoE redundant Maximum endpoint PoE power available from PoE power supply (watts) 250 W with optional redundancy Dimensions (H x W x D): 43.9 x 438.15 x 507.2 mm Package Weight: 20.88 Kg ISR 4461 10 GE SFP+, PoE GE/SFP, GE/SFP integrated WAN ports 10 Gbps+ performance 7 Gbps encrypted throughput Aggregate Throughput 1.5Gbps Total onboard WAN or LAN 10/100/1000 ports 4 RJ-45 based ports: 4 SFP based ports: 4 Enhanced service module slots 3 Doublewide service: module slots 2 NIM slots 3 OIR (all I/O modules): Yes Onboard ISC slot 1 SFP based ports 4 Enhanced service module slots 3 Doublewide service module slots 2 NIM slots 3 OIR (all I/O modules): Yes Onboard ISC slot 1 Default memory double-data-rate 3 (DDR3) error-correctioncode (ECC) DRAM (Combined control/services/data planes)- Not available  Maximum memory DDR3 ECC DRAM (Combined control/services/data planes)- Not available  Default memory DDR3 ECC DRAM (data plane) 4 GB Maximum memory DDR3 ECC DRAM (data plane) 4 GB Default memory DDR3 ECC DRAM (control/services plane) 8 GB Maximum memory DDR3 ECC DRAM (control/services plane) 32 GB Default flash memory: 8 GB Maximum flash memory: 32 GB External USB 2.0 slots (type A) 2 USB console port: type B mini (up to 115.2 kbps) 1 Serial console port: RJ45 (up to 115.2 kbps) 1 Serial auxiliary port: RJ45 (up to 115.2 kbps) 1 Power-supply options Internal: AC, DC and PoE Redundant power supply Internal: AC, DC and PoE Dimensions (H x W x D): 3.5 x 17.25 x 18.5 in(88.9 x 438.15 x 469.9 mm) Rack height 2 Rack Units (2RU)

For small campus deployments with the flexibility of copper or fiber uplinksUp to 250 APs 5000 clients and 5-Gbps throughputHot patching time saving and hitless upgradesAdvanced on demand telemetry The Cisco Catalyst 9800-L is a fixed wireless controller with seamless software updates for small and midsize enterprises. Built from the ground up for intent-based networking the Cisco Catalyst 9800 L brings togetherCisco IOS XE Software and Cisco RF excellence to create a best in-class wireless experience for your evolving and growing organization The Cisco Catalyst 9800-L is feature rich and enterprise ready to power your business-critical operations and transform end-user experiences:Choose between copper and fiber uplinks. This choice gives you flexibility in your network. High availability and seamless software updates enabled by hot and cold patching keep your clients and services always on in planned and unplanned events. Secure the air devices and users with the Cisco Catalyst 9800-L. The wireless infrastructure becomes the strongest first line of defense with Encrypted Traffic Analytics and Software-Defined Access (SD-Access). The controller comes with built-in security: Secure Boot runtime defenses image signing integrity verification and hardware authenticity. Built on a modular operating system the controller features open and programmable APIs that enable automation of day-0 to day-N network operations.Model-driven streaming telemetry provides deep insights into your network and client health. Maximum number of access points:250 500 (with performance license)Maximum number of clients : 5000 10000 (with performance license)Maximum throughput : 5 Gbps 10 Gbps(with performance license)Maximum WLANs : 4096Maximum VLANs : 4096Fixed uplinks : 2x 10G/Multigigabit copper or 2x 10G/Multigigabit fiberPower supply : 110W 12VDC AC/DC adapterMaximum power consumption : 9800-L-C: 86.9W (with 4.5W USB load) / 9800-L-F: 84.5W (assumes 2pc 2.5W SFP and with 4.5W USB load)Deployment modes : Centralized Cisco FlexConnect and fabric Form factor : 1RU; half-width chassis allows side-by-side installation in standard 19-in. rackLicense : Smart License enabledSoftware : Cisco IOS XEManagement : Cisco DNA Center Cisco Prime Infrastructure and third party (open standards APIs)Interoperability : AireOS-based controllersAccess points : Cisco Aironet 802.11ac Wave 1 and Wave 2 access points Cisco Catalyst 9100 802.11ax access pointsDimesnsion : Width : 8.5 in. (21.59 cm) Depth : 9.06 in. (23.01 cm)Height : 1.58 in. (4.02 cm)Weight : C9800-L-C: 3.95 lb. (1.79 kg)C9800-L-F: 4.01 lb. (1.82 kg)

For medium-sized campus deploymentsUp to 2000 APs 32 000 clients and 40-Gbps throughputHot patching time saving and hitless upgradesAdvanced on-demand telemetry High availability and seamless software updates enabled by hot and cold patching keep your clients and services always on during planned and unplanned events. Secure air devices and users with the Cisco Catalyst 9800-40. Wireless infrastructure becomes the strongest first line of defense with Cisco Encrypted Traffic Analytics (ETA) and Software-Defined Access (SD-Access). The controller comes with built-in security: secure boot runtime defenses image signing integrity verification and hardware authenticity. Built on a modular operating system the 9800-40 features open and programmable APIs that enable automation of day-0 to day-N network operations. Model-driven streaming telemetry provides deep insights into the health of your network and clients. Maximum number of access points : Up to 2000Maximum number of clients : 32 000Maximum throughput : Up to 40 GbpsMaximum WLANs : 4096Maximum VLANs : 4096Max Site Tags : 2000Max Flex APs per Site : 100Max Policy Tags : 2000Max RF Tags : 2000Max RF Profiles : 4000Max Policy Profiles : 1000Max Flex Profiles : 2000Interfaces : 4x 10 GE/1 GE SFP+/SFPPower supply : AC power with optional redundant AC powerMaximum power consumption : 381WDeployment modes : Centralized Cisco FlexConnect and Fabric Wireless (SD-Access)Form factor:1RULicense : Smart License enabledOperating system : Cisco IOS XEManagement : Cisco DNA Center Cisco Prime Infrastructure integrated WebUI and third party (open standards APIs)*Interoperability ; AireOS-based controllers*Policy engine : Cisco Identity Services Engine (ISE)*Location Platform : Cisco Connected Mobile Experiences (CMX)/ Cisco DNA Spaces *Access points : Aironet 802.11ac Wave 1 and Wave 2 access points Catalyst 9100 802.11ax access pointsWidth : 17.3 inches (43.94 cm)Depth : 19.5 inches (49.53 cm)Height : 1.72 inches (4.37 cm)Weight : 22.8 lb (10.34 kg)Hard Disk Drives (HDD) : SATA Solid-State Drive (SSD)240GB of memory

High availability and seamless software updates enabled by hot patching keep your clients and services always on in planned and unplanned events. Secure air devices and users with the Cisco Catalyst 9800-80. Wireless infrastructure becomes the strongest first line of defense with Cisco Encrypted Traffic Analytics (ETA) and Software-Defined Access (SD-Access).The controller comes with built-in security: secure boot runtime defenses image signing integrity verification and hardware authenticity. Built on a modular operating system the 9800-80 features open and programmable APIs that enable automation of day-0 to day-N network operations.Model-driven streaming telemetry provides deep insights into the health of your network and clients. Maximum number of access points : Up to 6000Maximum number of clients : 64 000Maximum throughput : Up to 80 GbpsMaximum WLANs : 4096Maximum VLANs : 4096Max site tags : 6000Max Flex APs per site : 100Max policy tags : 6000Max RF tags : 6000Max RF profiles : 12000Max policy profiles : 1000Max flex profiles : 6000Fixed uplinks : 8x 10 GE or 6x 10 GE + 2x 1 GE SFP+/SFPModular uplinks (optional) The supported uplink modules are C9800-18X1GE(=) C9800-10X10GE(=) C9800-1X40GE(=) C9800-2X40GE(=) C9800-1X100GE(=)The uplink modules are hot-swappable.Supports 10 GE 40 GE and 100 GE QSFP transceiversRedundant power supply : AC or DC power supplyMaximum power consumption with modules 600WDeployment modes : Centralized Cisco FlexConnect® and Fabric Wireless (SD-Access)Form factor : 2RULicense : Smart License enabledOperating system : Cisco IOS XEManagement : Cisco DNA Center Cisco Prime Infrastructure integrated WebUI and third party (open standards APIs)Interoperability : AireOS-based controllersPolicy engine : Cisco Identity Services Engine (ISE)Location platform : Cisco Connected Mobile Experiences (CMX)/Cisco DNA Spaces*Access points : Aironet 802.11ac Wave 1 and Wave 2 access points Catalyst 9100 802.11ax access pointsWidth : 17.3 inches (43.94 cm)Depth : 20.5 inches (52.07 cm)Height : 3.47 inches (8.81 cm)Weight : 31.5 lb (14.29 kg)Hard Disk Drives (HDD) : SATA solid-state drive (SSD) 240 GB of memory

Deploy in private or public (AWS) cloudUp to 6000 APs and 64 000 clientsHot patching time saving and hitless upgradesAdvanced on-demand telemetry High availability and seamless software updates enabled by hot and cold patching keep your clients and services always on in planned and unplanned events. Secure air devices and users with the Cisco Catalyst 9800-CL. Wireless infrastructure becomes the strongest first line of defense with Cisco Encrypted Traffic Analytics (ETA) and Software-Defined Access (SD-Access). The controller comes with built-in security: runtime defenses image signing and integrity verification.Deploy anywhere to enable wireless connectivity everywhere. Whether in a public or private cloud the Cisco Catalyst 9800-CL best meets your organization’s needs. Built on a modular operating system the 9800-CL features open and programmable APIs that enable automation of day-0 to day-N network operations. Model-driven streaming telemetry provides deep insights into the health of your network and clients. Maximum number of access points : Up to 6000Maximum number of clients : 64 000Maximum throughput : Up to 2.2 Gbps*Maximum WLANs : 4096Maximum VLANs : 4096Deployment modes : Centralized Cisco FlexConnect and Fabric Wireless (SD-Access)License : Smart License enabledOperating system : Cisco IOS XE SoftwareManagement : Cisco DNA Center Cisco Prime Infrastructure integrated WebUI and third party (open standards APIs)Interoperability : AireOS-based controllersPolicy engine : Cisco Identity Services EngineLocation platform : Cisco Connected Mobile Experiences (CMX) / DNA SpacesAccess points : Aironet 802.11ac Wave 1 and Wave 2 Catalyst 9100 802.11ax access points

Catalyst 9800 embedded on a Catalyst 9000 switch Ideal for SD-Access-enabled distributed branches and small campuses Up to 200 APs and 4 000 clients Hot patching  time saving and hitless upgrade   Simplified device deployment Unified management of wired and wireless networks Network virtualization and segmentation Group-based policies Context-based analytics Licensing Packaging :    The Cisco Catalyst 9000 family of switches introduces a new and simplified licensing package in the form of base and add-on licenses.   The perpetual licensing package includes the Network Essentials and Network Advantage licensing options that are tied to the hardware.  Between them  the base licensing packages cover switching fundamentals  management automation  troubleshooting  and advanced switching features.  These Network licenses are perpetual.   The subscription licensing package includes the Cisco DNA Essentials and Cisco DNA Advantage options. In addition to on-box capabilities   the features available with this package provide Cisco innovations on the switch  as well as on Cisco DNA Center.  The Cisco DNA subscription licenses are mandatory at the time of configuration.   License consumption is easily determined by the package itself. While perpetual licenses are always permanent and without an expiration date   subscription licenses have to be purchased for a 3-, 5-, or 7-year term (and hence are also known as term-based licenses).  Table 12 shows the combinations of perpetual and subscription licenses that must be purchased.   Connectors and cabling   1000BASE-T ports: RJ-45 connectors  4-pair Cat 5E UTP cabling Multigigabit-T ports: RJ-45 connectors  4-pair Cat 5E  Cat 6  Cat 6A UTP cabling 1000BASE-T SFP-based ports: RJ-45 connectors  4-pair Cat 5E UTP cabling  SFP transceivers: LC fiber connectors (single-mode or multimode fiber)  SFP+ transceivers: LC fiber connectors (single-mode or multimode fiber)  QSFP+ transceivers: MPO and LC fiber connectors (single-mode or multimode fiber)  QSFP+ connector  SFP+ connector  Cisco StackWise stacking ports: copper-based Cisco StackWise cabling  Cisco StackPower: Cisco proprietary power stacking cables  Ethernet management port: RJ-45 connectors  4-pair Cat 5 UTP cabling  Management console port: RJ-45-to-DB9 cable for PC connections

ISR 1100 4G/6G/LTE Viptela OS Cisco SD WAN 4-6 GE WAN/LAN ports ISR 1101 IOS XE/IOS XE SD-WAN Cisco SD-WAN 4 GE WAN/LAN ports Pluggable LTE ISR 1109 IOS XE/IOS XE SD WAN Cisco SD WAN 2-4 GE WAN/LAN ports Dual pluggable LTE ISR 111x IOS XE/IOS XE SD WAN Cisco SD WAN 4-8 GE WAN/LAN ports PoE ISR 1111X IOS XE/IOS XE SD-WAN Cisco SD-WAN security 8 GE WAN/LAN ports PoE ISR 1120 IOS XE/IOS XE SD WAN Cisco SD-WAN security 8 GE WAN/LAN ports Pluggable LTE, WiFi, DSL options ISR 1160 IOS XE/IOS XE SD-WAN Cisco SD-WAN security 8 GE WAN/LAN ports Pluggable LTE option

Pay as you grow performance (44 - 100 Gbps) Optional field replacement and Crypto module capability of up to 25 Gbps bandwidth with performance licenses Support for built in front panel 4xGE and 4x10GE; upgradeable to 8xGE amd 8x10GE with a license Extendable I/O with 1 Ethernet port adapter, and 1 single wide network interface module (NIM) or 1 double wide NIM Two AC or DC power supplies One field replaceable fan tray for front to back airflow The ASR 1002 HX is ideal for large enterprise branch offices, and as a high-performing edge solution for a private WAN It supports WAN aggregation and highly secure WAN Internet edge Data center interconnect Cisco Intelligent WAN (IWAN) Scalability: 44 Gbps – 100 Gbps Embedded service processor slots: Integrated Route processor slots: Integrated Redundancy: Software Redundant power supply: Dual Hitless software upgrade: Not available  Programming interface: XML and CLI script Management tool: Cisco Prime Network Analysis Module